STAINLESS STEEL & STEEL BLIND RIVET TS.SSAS. SERIES

STAINLESS STEEL / STEEL BLIND RIVET
TS.SSAS SERIES

MATERIAL AVALIABLE: 
RIVET: STAINLESS STEEL 302/ 316 (INOX A2/ A4/ 18-8/ 18-10)
SHAFT: STEEL 1018~1022

FINISH SURFACE AVALIABLE: 
RIVET: SELF COULOURED
SHAFT: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED

ADVANTAGES OF SS-S BLIND RIVET:
1.PROVIDE STRONG HOLDING FOR APPLICATION.
2.LOW IN COST COMPARE WITH BOLT AND NUT.
3.IDEAL FOR WIDE RANGE APPLICATION.
4.AVAILABLE IN DOME, COUNTERSUNK OR LARGE FLANGE STYLE.
5.FAST AND EASY TO INSTALL.
6.PROVIDE HIGH TENSILE AND SHEAR STRENGTH COMPARE WITH ALUMINUM OR STEEL.
7.IDEAL FOR RUST RESISTANCE APPLICATION.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

REBITADOR MANUAL

REBITADOR MANUAL

 

WEIGHT：0.6kg (1.32lb)
RIVET SIZE：2.4mm(3/32"),3.2mm(1/8"),4.0mm(5/32"),4.8mm(3/16").

RIVET MATERIAL：ALUMINUM & BRASS

RIVET FETURE：
1.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
2.EASY, FAST & SAFE INSTALLATION.

MALE FEMALE RIVET

MALE FEMALE RIVET

MATERIAL: ALUMINUM 5052 BRASS 2600 STAINLESS STEEL 302 / 410

APPLICATION : TABLEWARE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

  

SPEED PIN RIVET DRIVE PIN RIVET

SPEED PIN RIVET / DRIVE PIN RIVET

MATERIAL AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET): 
BODY: ALUMINUM 2117 / STAINLESS STEEL 302 (INOX A2/18-8) / STEEL 1006
PIN: ALUMINUM 2024 / STAINLESS STEEL 304 (INOX A2/18-8) / STEEL 1022

FINISH SURFACE AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET): 
PLATING: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED/ CR3 BLACK ZINC PLATED/ ANODIZED/CLEAN

ADVANTAGES OF SPEED PIN RIVET (DRIVE PIN RIVET): 
1.SPEED PIN RIVET IS FAST AND EASY TO INSTALL.
2.NO SPECIAL INSTALLATION TOOL IS REQUIRED FOR SPEED PIN RIVET, JUST A HAMMER WILL DO.
3.VARIOUS MATERIALS ARE AVAILABLE FOR SPEED PIN RIVET.
4.VARIOUS HEAD STYLES ARE AVAILABLE FOR SPEED PIN RIVET.
5.SPEED PIN RIVET WILL NOT DAMAGE THE APPLICATION SURFACE
6.SPEED PIN RIVET CAN BE RUST RESISTANT.
7.SPEED PIN RIVET CAN BE APPLIED TO WIDE THICKNESS.
8.THE APPEARANCE LOOKS GOOD AFTER INSTALLATION.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
★Available Size:5/32"、5/16"、3/16"、3/8"、1/8"、1/4"、

SERRATION UNDER HEAD SERIES

SERRATION UNDER HEAD SERIES

拉帽之應用:汽車業、電子業、薄金屬板、一般輕型組件

AIR PULL SETTER

AIR PULL SETTER

CHARACTERRISTICS OF AIR PULL SETTER： Small size、Long life、Large working torque
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently

INSTALL BLIND RIVET NUT BY AIR PULL SETTER

★ LG-801、LG-802、LG-803、LG-804 can choose one pulling nut.
LG-807 without pulling nut. 

SEAL RIVET NUT

SEAL RIVET NUT

 

MATERIAL AVALIABLE: ALUMINUM 5056, STAINLESS STEEL

SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT

CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.

APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 

Full-hexagon W. Small Flange Rivet Nut, Open End FHSM & FHSI

FULL-HEXAGON RIVET NUT

FHSM & FHSI SERIES
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END

 

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL, LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

 

FHBM & FHSI SERIES
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END