Single-Sided Blind Installation Efficient and Non-Destructive Joining

ALUMINUM / STEEL BLIND RIVET
TS.AAS. SERIES

 

The Aluminum & Steel Rivet is a blind rivet, and its major advantage is the capability for single-sided installation, allowing for permanent fastening without access to the back of the panel. The steel mandrel pulls the aluminum head, forming a secure "mushroom head" anchor point. This fast, clean fastening method is ideal for joining components in ducts, enclosures, or any assembly where only one side is accessible, serving as a standardized solution for enhancing production line efficiency.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Cylinder Nut Ensuring Secure Sealing of High-Pressure Cylinder Heads

CYLINDER NUT

 

The Cylinder Nut is typically used with a cylinder stud to fasten the cylinder head and engine block. In high-temperature, high-pressure applications like engines, the nut must provide extremely high clamping force to maintain a perfect seal for the cylinder head gasket. They are often made from high-strength alloy steel and designed with special locking features (like flange faces or self-locking stru

 

Combo Drive Tool Compatibility and Convenience of Phillips and Slotted

TRUSS COMBO HEAD POST SCREW
CHICAGO SCREW

The Truss Combo Head Post Screw typically utilizes a Combo Head design, integrating both Phillips and Slotted drive recesses. This greatly enhances the tool compatibility and convenience of installation, allowing operators to use the two most common types of screwdrivers for tightening and removal. This versatility makes it an ideal fastener for home repairs, office equipment assembly, and production lines requiring flexible tool options.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

    

Medical-Grade Material Precision Tolerance and Biocompatibility

Patch Insert - 360°

The Anti-Rotation Sleeve is precision-machined, typically from medical-grade titanium alloy or stainless steel, which are biocompatible materials. Dental applications demand extremely tight tolerances, and the sleeve must be manufactured to micron-level precision to ensure a perfect, seamless fit with the implant system. This precise fit effectively transmits occlusal forces and reduces gaps, thereby lowering the risk of bacterial ingress and surrounding tissue inflammation, which is vital for patient oral health.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Thin Wall:

Thick Wall:

Smooth Button Head Balancing Aesthetics, Security, and Comfort

MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

The Torx with Pin Screw is often paired with a smooth Button Head design. This head style offers a flat, aesthetic appearance, reducing sharp edges and enhancing safety and comfort in public areas. The button head also provides a larger clamping surface. Combined with the internal anti-tamper PIN, it hides security performance beneath an elegant exterior, suitable for outdoor furniture, playground equipment, and display fixtures.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

Efficient Spot Welding Fast and Stable Single-Sided Fixation

WELDING STUD

One of the biggest advantages of the Welding Stud is its high efficiency and single-sided operation. With specialized welding equipment, the stud can be installed extremely quickly, significantly boosting production line efficiency. Unlike traditional bolts, it requires no drilling or access to the back of the panel, making it ideal for blind connections in enclosed structures, pipes, or heavy plates. This simplifies assembly while ensuring connection stability.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

groove pin

GROOVED PIN

GROOVED PINS ARE NON-THREADED PRESS FIT FASTENERS THAT COMBINE HOLDING POWER, SHOCK RESISTANCE AND EASY TO INSTALL. GROOVED PINS ARE SOLID CYLINDRICAL PIN WITH THREE LONGITUDINCAL GROOVES, MANUFACTURED FORM BAR OR COIL STOCK.

ADVANTAGE OF GROOVED PIN: 
1.GROOVED PINS ARE SOLID
2.THERE ARE DIFFERENT GROOVE TYPES FOR A WIDE RANGE OF APPLICATIONS.
3.ONLY REQUIRE A STRAIGHT DRILLED HOLE.
4.EASY TO INSTALL AND QUICK TO ASSEMBLY.
5.REMOVABLE AND REUSABLE.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Stable Foundation Providing Firm Support and Vibration Isolation

Leveling Screw

The base of the Leveling Screw is often equipped with wear-resistant, non-slip pads or vibration-dampening feet. Beyond precise leveling, it ensures a stable three- or four-point support between the equipment base and the floor. This helps distribute the equipment weight and absorb minor floor vibrations, reducing impact on precision components. Quality leveling screws must possess high load capacity and excellent durability.

Mushroom Head Upgrade Super Grip from a Three-Petal Structure

STRETCH FOLDING BLIND RIVET
( TRI FOLD BLIND RIVET )

MATERIAL AVALIABLE: 
RIVET: ALUMINUM 5050
MANDREL: ALUMINUM 5056

The Tri-Fold Rivet creates a massive three-petal clamping head on the backside of the panel, establishing a bearing surface significantly larger than that of a standard rivet. This ultra-large bearing area design provides extremely high pull-out strength and maintains a secure hold even in applications with a wide grip range. It is particularly suited for outdoor furniture, vehicle interior panels, or boat assembly that require robust fixation but allow access only from one side.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

 

Flip Lock The Key to Quick and Safe Scaffolding Assembly

FRAME SCAFFOLDING FLIP LOCK PIN

 

The Flip Lock Pin is a quick-connect pin specifically designed for frame scaffolding. It combines a pin body with a spring-loaded flip lock mechanism. Installation is fast: simply insert the pin into the scaffolding tube and snap the flip lock closed for instant, secure locking. This design significantly reduces scaffolding erection time while ensuring high structural safety, preventing accidental disengagement during work at height.

 

Cold Press Installation Clean Fastening Without Heat Impact

TSC 7 SELF-CLINCHING STANDOFFS

Unlike traditional weld studs, the TSC 7 Standoff is installed using cold press technology. The process generates no heat, completely avoiding thermal distortion or surface coating damage that welding might cause. This clean, quick fastening method is particularly suitable for pre-finished panels that have been plated or painted, ensuring the panel maintains its original aesthetic and anti-corrosion properties after the fastener is set.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Tamper-Proof and Anti-Torque Torx Recess Ensures Secure Locking

梅花帶PIN公母套

SIX LOBE WITH PIN SEX BOLT

MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

The use of the Six Lobe with Pin drive recess ensures that the sex bolt can transmit high torque during tightening, achieving precise clamping of the panels while eliminating the cam-out effect common with traditional drives. Once tightened, the anti-tamper PIN makes unauthorized removal nearly impossible, thereby providing superior anti-vandalism performance for panel connections. This fastener is particularly suitable for structural components that require long-term fixation and cannot be easily disassembled.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

MALE SCREW

 

SELF TAPPING THREADED INSERT W. SLOTTED PIN

SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THICK WALL OR CLOSE TO AN EDGE

ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION

 

Robust Expansion Structure A Powerful Anchor for Hollow Panels

SQUARE BLIND JACK NUT

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 
Despite its square shape, the Square Blind Jack Nut retains the large bearing surface expansion advantage of the Jack Nut series. Upon installation, the square body uniformly expands to form a large bearing surface, distributing stress onto the hollow or soft base material. This structure provides extremely high pull-out strength. Concurrently, the mechanical interlock with the square hole enhances stability, ensuring the connection remains secure even in vibrating environments.

Protecting Sensitive Components The Key to Preventing Moisture Infiltration

SEAL RIVET NUT

 

For products containing sensitive electronic components or moisture-vulnerable materials, the Seal Rivet Nut is crucial for enhancing reliability. The sealant under the head design eliminates the need for extra sealing steps or gaskets, effectively blocking liquid or gas from penetrating through the gap between the fastener and the panel. This integrated solution guarantees both connection strength and prevention of water and gas penetration, thereby extending the overall service life of the product.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 

Pre-Set Stud Simplifying the Final Product Assembly Process

BLIND JACK NUT TOOL

 

The greatest advantage of the Bolt Rivet Nut is its pre-fixed stud. This eliminates the step of manually aligning screw holes and bolts during final product assembly; parts are simply placed over the stud and secured with a nut. It ensures precise thread alignment, significantly speeding up final assembly while offering high pull-out and torque resistance performance. It is suitable for applications requiring exposed threads, such as car body accessories and electronic racks.