SEAL RIVET NUT

SEAL RIVET NUT

 

MATERIAL AVALIABLE: ALUMINUM 5056, STAINLESS STEEL

SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT

CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.

APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 

AIR PULL SETTER

AIR PULL SETTER

CHARACTERRISTICS OF AIR PULL SETTER： Small size、Long life、Large working torque
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently

INSTALL BLIND RIVET NUT BY AIR PULL SETTER

★ LG-801、LG-802、LG-803、LG-804 can choose one pulling nut.
LG-807 without pulling nut. 

SERRATION UNDER HEAD SERIES

SERRATION UNDER HEAD SERIES

拉帽之應用:汽車業、電子業、薄金屬板、一般輕型組件

Carbon Rivet Pin

Carton Rivet Pin

APPLICATION: 

Carton Rivet Pin is used in document envelope (paper and poly),box

and make box/document envelope reuseable

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Leveling Screw

Leveling Screw

adjusting screws for bringing an instrument or other object into level
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

SIX LOBE WITHOUT PIN SEX BOLT

SIX LOBE WITHOUT PIN SEX BOLT (T25)

FEMALE NUT

MALE SCREW

 

MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Limitless Length Screws ( Extra Long Screw )

 Limitless Length Screws

( Extra Long Screw )

Application:

1.Car & motorcycle 

2.Furniture

3.Architecture

4.Mechanical & machine

 

Screw head type:Phillips,slotted,slotted truss,hexagon,six lobe,six lobe with pin

 

★ Other size, material are available upon request

 

turning part

Metal & Turning Part

 

Customized product
Call us on phone :+886-4-7237159
Mail:recept@topscrew.com.tw

 

SPOKE NIPPLE

MOTORCYCLE PARTS - SPOKE NIPPLE

MATERIAL AVAILABLE: 
ALUMINUM 7075

FINISH SURFACE: 
ANODIC TREATMENT

COLORS: 
BLUE, RED, GREEN, GOLD, SILVER, BLACK

★ENHANCE THE LOOK OF YOUR WHEELS!

CYLINDER NUT

CYLINDER NUT

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

CYLINDER SCREW

CYLINDER SCREW

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7 SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STANDOFFS： 
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STUDS： 
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 5 SELF-CLINCHING STANDOFFS

TSC 5 SELF-CLINCHING LOCK NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 4 SELF-CLINCHING STANDOFFS

TSC 4 SELF-CLINCHING NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 1 SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STANDOFFS： 
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

WELDING STUD

WELDING STUD

MATERIAL AVAILABLE: 
STEEL WITH COPPER PLATED, STAINLESS STEEL, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST