UNDERCUT ANCHOR,EXPANSION ANCHOR

EXPANSION ANCHOR

UNDERCUT ANCHOR

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

FEATURES OF ANCHOR BOLT: 
1.EASY TO INSTALL
2.HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
3.WITHOUT THERMAL BRIDGE
4.QUICK INSTALLATION
5.DOUBLE SAFETY FEATURES
6.MATERIAL ELECTROPLATED AND GALVANIZED

ADVANCED CURTAIN WALL SYSTEM; A.C.T.
INSTALLATION:

 

ADVANTAGE & BENEFIT OF ANCHOR BOLT: 
1.INVISIBLE FROM FRONT OF FAÇADE
2.STRESS-FREE FIXING IN NATURAL STONE
3.MAXIMU POSSIBLE PULL-OUT LOEAD HIGH COLLAPSE LOADS THAN TRADITIONAL SYSTEM
4.FAST & EASY INSTALLATION OF REVEAL
5.STATIC OPTIMISED POSITION OF ANCHOR THE MAX. BENDING STRESS IS REDUCED BY 50%

 

FIELDS OF APPLICATION: 
1.CURTAIN WALL INSTALLATION
2.BUILDING CURTAIN GLASS INSTALLATION
3.MARBLE INSTALLATION
4.STRENGTHENED GLASS INSTALLATION

EXAMPLE:

 

groove pin

GROOVED PIN

GROOVED PINS ARE NON-THREADED PRESS FIT FASTENERS THAT COMBINE HOLDING POWER, SHOCK RESISTANCE AND EASY TO INSTALL. GROOVED PINS ARE SOLID CYLINDRICAL PIN WITH THREE LONGITUDINCAL GROOVES, MANUFACTURED FORM BAR OR COIL STOCK.

ADVANTAGE OF GROOVED PIN: 
1.GROOVED PINS ARE SOLID
2.THERE ARE DIFFERENT GROOVE TYPES FOR A WIDE RANGE OF APPLICATIONS.
3.ONLY REQUIRE A STRAIGHT DRILLED HOLE.
4.EASY TO INSTALL AND QUICK TO ASSEMBLY.
5.REMOVABLE AND REUSABLE.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

WELDING STUD NUT

WELDING STUD NUT
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Vented Screw

Vented screw

vented screws provide a path for trapped air to be pumped away from the bottoms, sides, and shoulders of blind-tapped holes. 

WELDING STUD

WELDING STUD

MATERIAL AVAILABLE: 
STEEL WITH COPPER PLATED, STAINLESS STEEL, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 1 SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STANDOFFS： 
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STUDS： 
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 4 SELF-CLINCHING STANDOFFS

TSC 4 SELF-CLINCHING NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 5 SELF-CLINCHING STANDOFFS

TSC 5 SELF-CLINCHING LOCK NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7 SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STANDOFFS： 
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 8 BLIND PRESSED NUTS

TSC 8 BLIND PRESSED NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST