Full-hexagon W. Small Flange Rivet Nut, Open End FHSM & FHSI

FULL-HEXAGON RIVET NUT

FHSM & FHSI SERIES
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END

 

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL, LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

 

FHBM & FHSI SERIES
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END

 

BLIND RIVET NUT HAND TOOL

BLIND RIVET NUT HAND TOOL

 

NOSE - CHOOSE THREE FROM : 
M3, M4, M6, M8 8-32, 10-24, 10-32, 1/4-20, 5/16-18

CHARACTERRISTICS OF BLIND RIVET NUT HAND TOOL： 
Install without producing any harmful mark. Easy, fast & safe installation.

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST 

Half-hexagon W. Small Flange Rivet Nut, Open End HSM, HSI

HSM, HSI SERIES

HALF-HEXAGON W. SMALL FLANGE RIVET NUT
HEX FLANGE, HEX INTERNAL HOLE, OPEN END

 

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION

SEAL RIVET NUT

SEAL RIVET NUT

 

MATERIAL AVALIABLE: ALUMINUM 5056, STAINLESS STEEL

SURFACE FINISH AVALIABLE: CLEAN, ANODIC TREATMENT

CHARACTERISTICS OF SEAL RIVET NUT: NYPLAS IS APPLIED COATING UNDER THE HEAD OF THE BLIND RIVET NUT TO PROVIDE SEALING AGAINST AIR, DUST, WATER AND MOISTURE. WORKING TEMPERATURE: -40℃ TO 150℃.

APPLICATIONS OF SEAL RIVET NUT: OUTDOOR MACHINE、OUTDOOR ELECTRIC 、EQUIPMENT、OUTDOOR LIGHTING EQUIPMENT

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 

SPLINED RIVET NUT SMALL FLANGE, SPLINED RIVET NUT TSSS

SPLINED RIVET NUT

SMALL FLANGE, SPLINED RIVET NUT
TSSS SERIES

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: EASY AND FAST INSTALLATION,
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL
,LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

LARGE FLANGE, SPLINED RIVET NUT
TSBS SERIES

 

BLIND RIVET NUT FLAT HEAD RIVET, CLOSED END ,BEM-C, BAI-C

BLIND RIVET NUT-WATERPROOF

FLAT HEAD RIVET, CLOSED END
BEM-C, BAI-C SERIES

 

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METAL,
GENERAL LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST 
★ NOTE: K= KNURLED BODY

TS600 AIR RIVETING NUT TOOL

TS600 AIR RIVETING NUT TOOL

 

NOSE - CHOOSE THREE FROM : 
M4, M5, M6, M8, M10, M12
8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16

★ Can choose FIVE pulling nut. 

CHARACTERRISTICS OF TS600 RIVETING NUT TOOL： 
1.Large working torque
2.Semi-automatic spin-pull technology.
3.Compact, Ergonomically designed tool.
4.Stroke adjustment is quick and easy.
5.Safety; no electrical shock; no heat generated
6.Install without producing any harmful mark
7.High pull forces required to place large diameter inserts.
8.Change thread sizes or adjust stroke is done outside of the tool.
9.Under an easy pneumatic operation, a high performance can be achieved efficiently.
 

PLUSNUT - PRE-BULBED

PLUSNUT - PRE-BULBED
( QUAD FOLDING RIVETNUTS / SPLIT NUT )

FEATURES：
1.SUPERB PULL-OUT STRENGTH, EXCEPTIONAL TORQUE.
2.WIDE GRIP RANGE.
3.FASTENS SECURELY IN UNEVEN SURFACES.
4.INSTALLS CLEANLY WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).
5.THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.
6.SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.

APPLICATIONS：
1.AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)
2.AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)
3.TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING. 4.DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.
5.PLASTIC FABRICATIONS：ELECTRONICS, ENCLOSURES...ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

KNURLED THREADED INSERT

ST SERIES
KNURLED THREAD INSERT

Top Screw ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.
ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.
The material for ST series can be Steel and Stainless Steel.
Further information about recommended hole size, grip range and application thickness. Please refer below table.

APPLICATION: ST series Threaded insert is commonly used in any industry including automobile industry.

MATERIAL AVALIABLE: STEEL
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

BOLT RIVET NUT

BOLT (SCREW) RIVET NUT
IN ISO DIMENSION (MM)

MATERIALS ARE AVAILABLE FOR BOLT RIVET NUT: 
STAINLESS STEEL 302/304 (A2/18-8), 316(A4/18-10), STEEL, ALUMINUM 5056/6061, BRASS C2600

CHARACTERISTCS OF BOLT (SCREW) RIVET NUT: 
1.EASY AND FAST IN INSTALLATION WITH HANDY TOOL.
2.PROVIDES HIGH TORQUE AND STRONG THREADS IN COMPARING WITH NORMAL FASTENERS.
3.WELDING PROCESS IN NOT REQUIRED IN INSTALLING BOLT (SCREW) RIVET NUT.
4.ABLE TO REDUCE ASSEMBLING TIME AND IMPROVE OUTPUT.
5.ABLE TO PROVIDE A STRONG BINDING SUPPORT ON COMBINATION APPLICATIONS.
6.WILL NOT LOOSEN FROM VIBRATING OBJECTS ONCE ITS' INSTALLED.
7.BOLT (SCREW) IS ALREADY COMBINED WITH BLIND RIVET NUT BEFORE INSTALLATION, SO IT IS NOT NECESSARY TO INSTALL THE SCREW ON THE BLIND RIVET NUT.
8.COMBINED RIGIDLY TO SUIT VIBRATING ENVIRONMENT.
9.AVAILABLE IN BOTH UNC AND ISO DIMENSION.

★ OTHER SIZES AVAILABLE: 
TOP SCREW IS ABLE TO MANUFACTURE OTHER SIZES OF BOLT (SCREW) RIVET NUT APART FROM THE SIZES SHOWN IN TABLE BELOW. TOP SCREW IS ABLE TO MANUFACTURE BOLT (SCREW) RIVET NUT BASED ON THE STANDARD CYLINDRICAL, FULL HEXAGONAL AND HALF HEXAGONAL BLIND RIVET NUT IN TOP SCREW'S CATALOG. TOP SCREW IS ALSO CAPABLE FOR CUSTOMIZED SCREW (BOLT) RIVET NUT TO FULFILL YOUR REQUIREMENT FROM DESIGNING, RECOMMENDING AND OF COURSE MANUFACTURING.

NOTE 1: GRIP RANGE CAN BE AFFECTED BY PARENT MATERIAL DENSITY AND ACTUAL HOLE SIZE. WE SUGGEST TRIAL INSTALLATIONS TO DETERMINE OPTIMUM GRIP.
NOTE 2: ADDITIONAL UNF FINE THREADS, GRIP LENGTHS AND MATERIALS ARE AVAILABLE. PLEASE CONTACT TOP SCREW METAL CORP. FOR MORE DETAIL.

THREAD SPECIFICATION:
Unified - 2A/21 per ASME B1.1
Metric ­– 6g/21 per ASME 1.21M 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

BOLT (SCREW) RIVET NUT
IN UNC DIMENSION (INCH)

 

BLIND JACK NUT TOOL

BLIND JACK NUT TOOL

 

 

STAINLESS STEEL BLIND JACK NUT

STAINLESS STEEL BLIND JACK NUT

HOW TO SOLVE?
YOU JUST NEED OUR PRODUCT 
☆ STAINLESS STEEL BLIND JACK NUT ☆ 

The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials. When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert. 

ADVANTAGE FOR STAINLESS STEEL BLIND JACK NUT: 
AVOID CORROSION, PREVENT RUST, SUITABLE FOR OUTDOOR

FEATURES FOR BLIND JACK NUT: 
1.FASTENS IN BLIND HOLES
2.FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
3.NOT HOLE SIZE SENSITIVE
4.SUITABLE FOR WIDE GRIP RANG

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 
INSTALLATION STEPS FOR BLIND JACK NUT: