Precision Alignment Facilitating Bridge Alignment for Multi-Unit Restorations

Patch Insert - 180°

The directional characteristic of the 180° Anti-Rotation Sleeve makes it crucial in multi-unit or bridge restorations. When multiple implants are used, the precise 180° orientation helps the technician and dentist to easily align all abutments, ensuring the overlying bridge or full denture can be seamlessly and stress-free installed. This simplified alignment process reduces assembly errors and guarantees the passive fit of the final restoration.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Thin Wall:

Thick Wall:

Optimized Interface Reducing Friction and Extending Wheel Life

MOTORCYCLE PARTS - SPOKE NIPPLE

To ensure smooth tension adjustment and resist potential corrosion lock-up, lubricant or anti-seize compound is typically applied to the spoke threads and nipple interface during assembly. Furthermore, high-quality rim design ensures the nipple's seating angle perfectly aligns with the spoke's pulling angle, avoiding unnecessary stress concentration at the nipple head, thereby significantly extending the lifespan of both the nipple and the spoke.

Optimized Design Stress Distribution and Thread Fatigue Life

CYLINDER SCREW

  Many Cylinder Screws utilize special thread designs, such as larger lead-in chamfers or rolled threads, to optimize stress distribution and improve fatigue life. They are often designed as stretch bolts to maintain consistent clamping force through thermal expansion and contraction cycles. The material and length are precisely calculated to maximize resistance to high-cycle fatigue, ensuring engine reliability over hundreds of thousands of cycles.

 

Reusable Fasteners Disassembly for Display and Storage

Carton Rivet Pin

APPLICATION: 

Many Carton Fasteners utilize a reusable structure similar to sex bolts. This allows assembled cartons or cardboard displays to be easily disassembled, flattened, and stored when not needed, and then reassembled later. This flexibility for reusability and structural modification offers great convenience and cost efficiency for retail displays, temporary signage, or sample catalogs that require frequent content changes.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

High Flexibility Easy Disassembly and Adaptability to Various Thicknesses

BINDING POST
CHICAGO SCREW

MATERIAL AVALIABLE: 
ALUMINUM, BRASS, STAINLESSSTEEL

SURFACE FINISH AVALIABLE: 
CLEAN The Chicago Screw utilizes a threaded connection, with its main advantage being its reusability. Users can easily replace pages or adjust components without damaging the material, making it ideal for modular designs or products requiring periodic content updates. By selecting female posts of different lengths, it can easily adapt to various thickness combinations. This high flexibility makes it a standard fastener for commercial displays, stationery, and customized products.

 

   

 

TSC 1 SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STANDOFFS： 
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Roof Washer

Roof Washer

A system for diverting rainwater at the start of each rainfall away from collection tanks and cisterns, so that only the cleaner water that follows is collected for reuse.

Patch Insert - 180°

Patch Insert - 180°

Material:Steel, Stainless Steel

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Thin Wall:

Thick Wall:

SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS

I. HOLE SIZE: 
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

II. HOLE DEPTH: 
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

III. COUNTERSINK 
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

IV. WALL THICKNESS 
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

   

E SELF-DRIVING NUT

E SELF-DRIVING NUT
MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL AND BRASS

ADVANTAGES:
1.INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.
2.INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.
3.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
4.INSTALL INTO VARIES MATERIAL.
5.THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.
6.EASY, FAST & SAFE INSTALLATION.

INSTRUCTIONS OF E-SELF DRIVING NUT:
AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

FEATURE OF E-SELF DRIVING NUT
(COMPARE WITH SEX BOLTS) 

I. ROUND BODY WITH FANGSON IT 
1.GRIP THE APPLICATION TIGHTLY
2.CANNOT BE DISASSEMBLED EASILY
3.PREVENT ANY ONE WHO INTENT TO PULL OUT

II. SCREW HEADCAN BE YOUR CHOICE 
1.THE SCREW HEAD CAN BE TAMPERPROOF
2.HARDLY TO DISASSEMBLED
3.COMBINE WITH GOOD SURFACE OUTLOOK

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

 

 

 

ONE WAY SEX BOLTS

單向公母套

ONE WAY SEX BOLTS

單向公母套之材質： 鐵、白鐵、銅。
單向公母套之表面處理： 依客戶要求。
★ 其他尺寸和材質可依客戶要求訂製。

母套

螺絲

SLOTTED TRUSS HEAD SEX BOLTS

SLOTTED TRUSS HEAD SEX BOLTS

MATERIAL AVALIABLE:
  STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STUDS： 
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

WELDING STUD

WELDING STUD

MATERIAL AVAILABLE: 
STEEL WITH COPPER PLATED, STAINLESS STEEL, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST