TSC 7 SELF-CLINCHING STANDOFFS

TSC 7 SELF-CLINCHING STANDOFFS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STANDOFFS： 
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL.
THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 8 BLIND PRESSED NUTS

TSC 8 BLIND PRESSED NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

 

SLOTTED TRUSS HEAD SEX BOLTS

SLOTTED TRUSS HEAD SEX BOLTS

MATERIAL AVALIABLE:
  STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TRUSS COMBO HEAD POST SCREW

TRUSS COMBO HEAD POST SCREW
CHICAGO SCREW

MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

    

SIX LOBE WITH PIN SEX BOLT

梅花帶PIN公母套

SIX LOBE WITH PIN SEX BOLT

MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

MALE SCREW

 

HIGH SHEAR STRENGTH BLIND RIVET

HIGHT SHEAR STRENGTH BLIND RIVET

 

 

 

MATERIAL AVALIABLE: 
RIVET: STEEL
SHAFT: STEEL

ADVANTAGES OF HIGH SHEAR STRENGTH BLIND RIVER: 
1.EASY & FAST INSTALLATION
2.HIGH FASTENING STRENGTH
3.THE MANDREL WILL BE CUT OFF OUTSIDE OF BODY AFTER RIVETING FOR INCREASING THE SHEAR STRENGTH
4.THE SHEAR STRENGTH IS ALMOST TWICE THAN THE ORIGINAL RIVET
5.SUITABLE FOR CONTAINER, BODY WORK, ELECTRIC CABINET, AND CONCTRUCTION ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 
ALL STEEL BLIND RIVET V.S. HIGH SHEAR STRENGTH BLIND RIVER
HEAD

SIDE

INSPECTION REPORT OF SHEAR STRESS

 

SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS

I. HOLE SIZE: 
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

II. HOLE DEPTH: 
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

III. COUNTERSINK 
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

IV. WALL THICKNESS 
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST