SECURITY SYSTEM SEX BOLTS - ONE WAY, SIX LOBE, E SELF DRIVING NUT, TRUSS COMBO HEAD, ARCHITECTURAL SEX BOLTS

SECURITY SYSTEMS

ONE WAY SEX BOLTS

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SIX LOBE WITH PIN SEX BOLT

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

E-SELF DRIVING NUT

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL AND BRASS

ADVANTAGES:

• INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.

• INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.

• INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.

• INSTALL INTO VARIES MATERIAL.

• THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.

• EASY, FAST & SAFE INSTALLATION.

INSTRUCTIONS OF E-SELF DRIVING NUT:

AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1.    ROUND BODY WITH FANGSON IT

• GRIP THE APPLICATION TIGHTLY
• CANNOT BE DISASSEMBLED EASILY
• PREVENT ANY ONE WHO INTENT TO PULL OUT

2.    SCREW HEADCAN BE YOUR CHOICE

• THE SCREW HEAD CAN BE TAMPERPROOF
• HARDLY TO DISASSEMBLED
• COMBINE WITH GOOD SURFACE OUTLOOK 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST　

TRUSS COMBO HEAD POST SCREW

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

ARCHITECTURAL SEX BOLTS

MATERIAL：

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

FETURES & ADVANTANGES：

• No way to turn the sex bolt, because Architectural Sex Bolts have smooth Truss Heads - no drive.

• The knurled barrel keeps the sex bolt from spinning while the flat head screw is tightened from the other side.

• Strong, secure, easy to assemble.

• Good looking solution for many sheet metal anchoring applications.

• Particular useful in fiberglass marine applications.

APPLICATIONS：

• Door and Lock Accessory mounts

• Hurricane Protection Shutters

• Elevator Protection Gates

• HVAC ventilation

• Docks and Construction projects

• Architectural - Railings, Cabinetry, Shutters, Seats, and more.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC 8 - DIMENSIONS & SPECIFICATIONS									(MM)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.08 -0.00	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.25	MIN
M3X0.5	3501	3.80	1.00	4.25	4.22	8.50	0.97	6.35	4.80
	3502		1.40				1.37
M4X0.7	4701	5.20	1.00	5.40	5.38	9.80	0.97	7.95	6.90
	4702		1.40				1.37
M5X0.8	5801	6.00	1.00	6.40	6.38	9.80	0.97	8.75	7.10
	5802		1.40				1.37
M6X1.0	6101	7.80	1.40	8.75	8.72	12.70	1.37	11.10	8.60
	6102		2.30				2.21

TSC 8 - DIMENSIONS & SPECIFICATIONS									(INCH)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.003 -0.000	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.01	MIN
#4-40	4401	0.149	0.040	0.166	0.165	0.335	0.038	0.250	0.190
	4402		0.056				0.054
#6-32	6321	0.169	0.040	0.187	0.186	0.335	0.038	0.280	0.220
	6322		0.056				0.054
#8-32	8321	0.204	0.040	0.213	0.212	0.385	0.038	0.310	0.270
	8322		0.056				0.054
#10-32	10321	0.235	0.040	0.250	0.249	0.385	0.038	0.340	0.280
	10322		0.056				0.054
1/4-20	4201	0.305	0.056	0.344	0.343	0.500	0.054	0.430	0.340
	4202		0.090				0.087

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

★ Other sizes, material are available upon request.

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  
SELF-CLINCHING STANDOFFS

TSC 7 - DIMENSIONS & SPECIFICATIONS																(MM)
THREAD SIZE	P/N.	L LENGTH ±0.08											+0.08 -0.00	D DIM +0.00 -0.13	MIN	MIN
		TYPES				TYPE ST		TYPE SC
M2.5X0.45	2545	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	2545B												5.40	5.38	7.10	0.63
M3.0X0.5	350	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	350B												5.40	5.38	7.10	0.63
M3.5X0.6	356		2	3	4	6	8	10	12	14	16	18	5.40	5.38	7.10	0.63

TSC 7 - DIMENSIONS & SPECIFICATIONS																(INCH)
THREAD SIZE	P/N.	L LENGTH ±0.003												+0.003 -0.000	D DIM +0.000 -0.005	MIN	MIN
		TYPES				TYPE ST		TYPE SC
#2-56	256	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	256B													0.213	0.212	0.270	0.025
#4-40	440	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	440B													0.213	0.212	0.270	0.025
#6-32	632		0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.213	0.212	0.270	0.025

ADVANTAGES OF CLINCHING PARTS:

• May be installed using any parallel acting squeezing force.

• Provide high pushout and torque-out resistance.

• Do not require special hole preparation, such as chamfering and deburring.

• Reverse side of metal sheet remains flush.

• No retapping necessary after application.

• Low installed costs.

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ Other sizes, material are available upon request.

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

TSC 6 - DIMENSIONS & SPECIFICATIONS     (MM) THREAD SIZE P/N. L LENGTH ±0.40 D ±0.40 +0.08 -0.00 MAX. REC. NUT TIGHT. TORQUE N.m MIN MIN   M2.5X0.45 2545 6 8 10 12 15 18 　 　 　 　 　 　 　 4.1 2.5 0.40 5.4 1.0   M3X0.5 350 6 8 10 12 15 18 20 22 25 　 　 　 　 4.6 3.2 0.72 5.6 1.0   M3.5X0.6 356 6 8 10 12 15 18 20 22 25 28 30 　 　 5.3 3.5 1.10 6.4 1.0   M4X0.7 470 6 8 10 12 15 18 20 22 25 28 30 35 38 5.9 4.0 1.60 7.2 1.0   M5X0.8 580 　 8 10 12 15 18 20 22 25 28 30 35 38 6.5 5.0 3.40 7.2 1.0   M6X1.0 610 　 　 10 12 15 18 20 22 25 28 30 35 38 8.2 6.0 5.70 7.9 1.6   M8X1.25 8125 　 　 　 12 15 18 20 22 25 28 30 35 38 9.6 8.0 14.00 9.6 2.4 TSC 6 - DIMENSIONS & SPECIFICATIONS     (INCH) THREAD SIZE P/N. L LENGTH ±0.015 D ±0.015 +0.003 -0.000 MAX. REC. NUT TIGHT. TORQUE IN.-LBS MIN MIN   #2-56 256 0.250 0.3125 0.375 0.500 0.625 0.750 　 　 　 　 0.144 0.085 2.5 0.187 0.040   #4-40 440 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 　 　 0.176 0.111 5 0.219 0.040   #6-32 632 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.206 0.137 10 0.250 0.040   #8-32 832 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.237 0.163 15 0.281 0.040   #10-24 1024 　 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.256 0.189 25 0.281 0.040   #10-32 1032 　 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.256 0.189 30 0.281 0.040   1/4-20 420 　 　 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.337 0.249 55 0.312 0.062   5/16-18 518 　 　 　 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.376 0.311 115 0.375 0.093

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 

Steel, Stainless Steel

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ STUDS：

Externally threaded fasteners which are used where the attachment must be positioned before being fastened.

★ Other sizes, material are available upon request.