BLIND JACK NUT TOOL

BLIND JACK NUT TOOL

KNURLED THREAD INSERT - ST SERIES

KNURLED THREAD INSERT - ST SERIES

MATERIAL AVALIABLE：STEEL

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SECURITY SYSTEM - SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS

SECURITY SYSTEM - SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS

MATERIAL AVALIABLE：
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SELF TAPPING THREADED INSERT SERIE

SELF TAPPING THREADED INSERT SERIES

◆  SLOTTED PART

MATERIAL AVAILABLE：

STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604

SURFACE FINSIH AVAILABLE：
CR3 WHITE/YELLOW ZINC PLATED

CHARACTERISTICS：
•EASY TO INSTALLED
•DESIGNED TO REPLACE SPRING COIL
•PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC
•ABLE TO INSTALL FOR VIBRATING ENVIRONMENT

APPICATIONS：
•CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
•DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.

◆ THREE HOLE THIN WALL/THICK WALL

MATERIAL AVAILABLE：
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THICK WALL OR CLOSE TO AN EDGE

ADVANTAGE：
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE

◆ THREE HOLE W. SLOTTED PIN

MATERIAL AVAILABLE：
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THIN WALL OR CLOSE TO AN EDGE

ADVANTAGE：
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE

◆ MANUAL INSTALLATION TOOL

STEP 1.	STEP 2.	STEP 3.
鑽孔之後，將襯套裝置於工具上朝向要裝置的地方	維持工具垂直，向左旋轉將襯套轉入	裝入之後，將工具向右垂直旋轉出來，工具自然會自動地鬆開

HOLE SIZE：
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATE SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

HOLE DEPTH：
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

◆ AIR INSTALLATION TOOLS

STAINLESS STEEL BLIND JACK NUTS

STAINLESS STEEL BLIND JACK NUTS

FOR LATEST TYPE LICENSE PLATE

 

The latest type license plates’ width and height are different from the original license plate. In addition, when you replace the license plate, you find that the holes place of the latest type license plate and the bodywork are not matched.

HOW TO SOLVE？

YOU JUST NEED OUR PRODUCT

☆ STAINLESS STEEL BLIND JACK NUT ☆

 

The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials. When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.

ADVANTAGE：

AVOID CORROSION

PREVENT RUST

SUITABLE FOR OUTDOOR

FEATURES：

FASTENS IN BLIND HOLES

FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES

NOT HOLE SIZE SENSITIVE

SUITABLE FOR WIDE GRIP RANG

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

BLIND JACK NUT

BLIND JACK NUT

STEEL

STAINLESS STEEL

The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials.

When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.

Standard blind jack nut are manufactured of steel with a commercial zinc plating.

All blind jack nuts can be supplied with brass coated which assist galvanic corrosion concerns.

MATERIAL AVAILABLE：

STEEL, STAINLESS STEEL304, BRASS

FEATURES：

FASTENS IN BLIND HOLES

FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES

NOT HOLE SIZE SENSITIVE

SUITABLE FOR WIDE GRIP RANGE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

PLUSNUT – STANDARD & PRE-BULBED

PLUSNUT – STANDARD

( QUAD FOLDING RIVETNUTS / SPLIT NUT )

PLUSNUT – PRE-BULBED

( QUAD FOLDING RIVETNUTS / SPLIT NUT )

FEATURES：

• SUPERB PULL-OUT STRENGTH, EXCEPTIONAL TORQUE.

• WIDE GRIP RANGE.

• FASTENS SECURELY IN UNEVEN SURFACES.

• INSTALLS CLEANLY WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).

• THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.

• SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.

APPLICATIONS：

• AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)

• AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)

• TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING.

• DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.

• PLASTIC FABRICATIONS：ELECTRONICS, ENCLOSURES…ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST