KNURLED THREADED INSERT

ST SERIES
KNURLED THREAD INSERT

Top Screw ST series Threaded insert is designed to be installed in the small space. The body length after riveting is shorter than any standard type of blind rivet nut. The head of insert can press tightly against surface of application.
ST series can be installed on application which the thickness is thicker than 0.03” (0.76mm) and the application can be most any type of material.
The material for ST series can be Steel and Stainless Steel.
Further information about recommended hole size, grip range and application thickness. Please refer below table.

APPLICATION: ST series Threaded insert is commonly used in any industry including automobile industry.

MATERIAL AVALIABLE: STEEL
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

BLIND JACK NUT TOOL

BLIND JACK NUT TOOL

 

 

Full-hexagon W. Small Flange Rivet Nut, Open End FHSM & FHSI

FULL-HEXAGON RIVET NUT

FHSM & FHSI SERIES
FULL-HEXAGON WITH SMALL FLANGE RIVET NUT
HEX FLANGE,ROUND INTERNAL HOLE, OPEN END

 

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL, LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

 

FHBM & FHSI SERIES
FULL-HEXAGON WITH BIG FLANGE RIVET NUT
FLAT HEAD, ROUND INTERNAL HOLE, OPEN END

 

AIR PULL SETTER

AIR PULL SETTER

CHARACTERRISTICS OF AIR PULL SETTER： Small size、Long life、Large working torque
Low energy consumption、Easy, fast & safe installation、
Safety; no electrical shock; no heat generated、Install without producing any harmful mark、Under an easy pneumatic operation, a high performance can be achieved efficiently

INSTALL BLIND RIVET NUT BY AIR PULL SETTER

★ LG-801、LG-802、LG-803、LG-804 can choose one pulling nut.
LG-807 without pulling nut. 

BLIND RIVET NUT HAND TOOL

BLIND RIVET NUT HAND TOOL

 

NOSE - CHOOSE THREE FROM : 
M3, M4, M6, M8 8-32, 10-24, 10-32, 1/4-20, 5/16-18

CHARACTERRISTICS OF BLIND RIVET NUT HAND TOOL： 
Install without producing any harmful mark. Easy, fast & safe installation.

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST 

TS600 AIR RIVETING NUT TOOL

TS600 AIR RIVETING NUT TOOL

 

NOSE - CHOOSE THREE FROM : 
M4, M5, M6, M8, M10, M12
8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16

★ Can choose FIVE pulling nut. 

CHARACTERRISTICS OF TS600 RIVETING NUT TOOL： 
1.Large working torque
2.Semi-automatic spin-pull technology.
3.Compact, Ergonomically designed tool.
4.Stroke adjustment is quick and easy.
5.Safety; no electrical shock; no heat generated
6.Install without producing any harmful mark
7.High pull forces required to place large diameter inserts.
8.Change thread sizes or adjust stroke is done outside of the tool.
9.Under an easy pneumatic operation, a high performance can be achieved efficiently.
 

SMALL FLANGE & FLAT HEAD BLIND RIVET NUT SMALL FLANGE BLIND RIVET NUT, OPEN END ,SEM, SAM, SAI

SMALL FLANGE & FLAT HEAD BLIND RIVET NUT

SMALL FLANGE BLIND RIVET NUT, OPEN END
SEM, SAM, SAI SERIES

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT. THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METALGENERAL,
LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST 
★ NOTE: K= KNURLED BODY

 

 

FLAT HEAD BERYNUT, OPEN END
BEM, BAI, SERIES

★ NOTE: K= KNURLED BODY