TSC 1 SELF-CLINCHING STANDOFFS

 

TSC 1  SELF-CLINCHING STANDOFFS

Through Threads Blind Threads Through – Hole Threads

DIMENSIONS & SPECIFICATIONS (MILLIMETERS) THREAD SIZE PART NO L LENGTH + .05 / – 0.13 +.08 -.00 D DIM +.00 -.13 H HEX DIM (NOM.) C COUNTER BORE ±0.13 MIN MIN M3x0.5 350 3 4 6 8 10 12 14 16 18 20 22 25 4.2 4.19 4.8 3.2 6.0 1.0 350B 3 4 6 8 10 12 14 16 18 20 22 25 5.4 5.38 6.4 3.2 7.0 1.0 M3.5×0.6 356 3 4 6 8 10 12 14 16 18 20 22 25 5.4 5.38 6.4 4.0 7.0 1.0 M4x0.7 470 3 4 6 8 10 12 14 16 18 20 22 25 7.2 7.11 7.9 4.8 8.0 1.3 M5x0.8 580 3 4 6 8 10 12 14 16 18 20 22 25 7.2 7.11 7.9 5.2 8.0 1.3 S DIM. MIN.   3.2 4.0 5.0 6.5 9.5             T ± 0.40 NONE 4.0 8.0 11.0             DIMENSIONS & SPECIFATIONS (INCH) THREAD SIZE PART NO. L LENGTH + 0.002/ -0.005 +.003 -.000 C DIM +.000 -.005 H HEX DIM (NOM.) D counter. BORE ±0.05 #4-40 440 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.5625 0.625 0.6875 0.750 0.8125 0.875 0.9375 1.0 1.0625 0.166 0.165 0.1875 0.125 0.23 0.040 440B 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.5625 0.625 0.6875 0.750 0.8125 0.875 0.9375 1.0 1.0625 0.213 0.212 0.25 0.125 0.27 0.040 #6-32 632 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.5625 0.625 0.6875 0.750 0.8125 0.875 0.9375 1.0 1.0625 0.213 0.212 0.25 0.156 0.27 0.04 632B 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.5625 0.625 0.6875 0.750 0.8125 0.875 0.9375 1.0 1.0625 0.281 0.280 0.3125 0.156 0.31 0.05 #8-32 832 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.5625 0.625 0.6875 0.750 0.8125 0.875 0.9375 1.0 1.0625 0.281 0.280 0.3125 0.188 0.31 0.05 #10-30 1032 0.125 0.1875 0.250 0.3125 0.375 0.4375 0.500 0.5625 0.625 0.6875 0.750 0.8125 0.875 0.9375 1.0 1.0625 0.281 0.280 0.3125 0.203 0.31 0.05 S DIM. MIN. FULL THREAD 0.1563 0.1875 0.25 0.375   T ± 0.0156 FULL THREAD 0.1875 0.3125 0.4375

ADVANTAGES OF CLINCHING PARTS:

• PROVIDE STRONG THREADS IN METAL AS THIN AS 020″ / .51 MM.
• MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
• PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
• DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
• REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
• NO RETAPPING NECESSARY AFTER APPLICATION.
• LOW INSTALLED COSTS.

★STANDOFFS：
USED WHERE IT IS NECESSARY TO STACK OR SPACE COMPONENTS AWAY FROM THE PANEL. THRU-THREADED OR BLIND TYPES ARE GENERALLY STANDARD.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 TOP QUALITY INSTRUMENT INC. USA

http://www.topqualityinstrument.com/